Laser scanning in food industry

Kvejborg, dänischer Laserscanning Europe Partner, setzt das Laserscanning als Aufmaßverfahren in der Nahrungsmittelindustrie ein.
Kvejborg ist ein dänisches Engineering-Unternehmen für die Konstruktion von Werkzeugen und Roboteranwendungen. Kvejborg verwendet schon Short Range Scanner der Firma Creaform für das Aufmaß von Werkzeugen und kleinen Bauteilen. Soren Kvejborg, der Direktor, ist von der Zukunft des Laserscanning vollkommen überzeugt und sieht die Anwendung dieser Technologie als festen Unternehmensbestandteil.
TitleErstmalige Zusammenarbeit von Laserscanning Europe GmbH und Kvejborg
Kvejborg und die Firma Laserscanning Europe GmbH arbeiteten erstmalig bei einem Windkraftprojekt zusammen, bei dem gezielt hohe, genaue Short Range Scanner und großvolumige Scanner kombiniert wurden.
Laserscanning Europe konnte Kvejborg davon überzeugen, dass auch das großvolumige Scannen für die Bewältigung von Aufmaßen als Planungsgrundlage für Engineering-Dienstleistungen in der Roboteranwendung sehr interessant sein kann.
TitleAnwendung in der dänischen Lebensmittelindustrie
Nur wenige Wochen nach dem ersten Denkanstoß war schon die erste Anwendung gefunden. Die Firma Kvejborg arbeitet als Konstruktionsbüro für einen führenden Hersteller von Roboteranwendungen und Spezialmaschinenbau in der Verpackungsindustrie in Skandinavien.
Der skandinavische Spezialanlagenbauer steht häufig vor dem Problem, neue Maschinen und Roboter in bestehende Anlagen zu implementieren. Oftmals wurden die Anlagen von anderen Herstellern erstellt und es liegen meistens keine aktuellen Pläne vor. Somit verbergen sich in jedem Projekt enorme Planungsrisiken.
Soren Kvejborg schlug seinem Kunden vor, das Laserscanning bei einem der nächsten Projekte anzuwenden. Beim ersten Pilotprojekt bestand die Aufgabenstellung darin, zwei Roboter-Arbeitsplätze einer Verpackungsstation in einer Großbäckerei aufzumessen.
Laserscanning ist für das Aufmaß von Produktionseinrichtungen, Rohrleitungsverläufen und Betriebsmitteln in der Lebensmittelindustrie besonders interessant, da oft mehrschichtig produziert wird. Das reine Vermessen der einzelnen Roboterzellen in der Verpackungsanlage dauert pro Zelle nur 10 Minuten. Dies war sehr wichtig, da in dieser extrem kurzen Zeit das Stapeln der Verpackungen auf Paletten durch Produktionsmitarbeiter sichergestellt wurde. Die restlichen Aufnahmen im Außenbereich der Zelle konnten dann problemlos vorgenommen werden.
Somit konnte die Anlage in der laufenden Produktion vollständig aufgemessen und dokumentiert werden.
Für das Aufmaß unter derartig schwierigen Umständen zog Kvejborg einen professionellen Operator von Laserscanning Europe zur Unterstützung in diesem Projekt hinzu.
Durch den professionellen Einsatz konnte die Erfassung der gesamten Produktionsanlage ohne nennenswerte Störungen des Produktionsablaufs durchgeführt werden. Mittels Laserscanning konnte Kvejborg dem Anlagenbauer in 4 Stunden ein perfektes Aufmaß – ohne Produktionsstörungen für die dänische Großbäckerei – zur Verfügung stellen. Bisher benötigte das Aufmaß der Anlage mittels Zollstock und Disto durch den Anlagenbauer selbst wesentlich mehr Zeit. Ein voller Erfolg für alle Seiten.
TitleDatenbearbeitung mit PointCab
In der weiteren Bearbeitung kam die Software PointCab zum Einsatz. PointCab generiert automatisch Layout und Schnitte aus Laserscanning-Daten. Mittels der Software konnten schon am nächsten Tag die ersten Layouts zur Verfügung gestellt werden. Der Fachplaner des Anlagenbauers war über die schnelle Lieferung der Vermessungsergebnisse wirklich überrascht.
Ein großer Vorteil von PointCab ist, dass die Ergebnisse in vielen CAD-Systemen verwendbar sind. Kvejborg als Engineering-Dienstleister setzt Solidworks ein; der Anlagenbauer arbeitet mit Autodesk Inventor. Die Verarbeitung von Laserscanning-Daten in der Form von Punktwolken wäre undenkbar gewesen, da diese Systeme keine Punktwolkenunterstützung anbieten. Mit PointCab können jetzt alle Beteiligten die gleiche Planungsgrundlage verwenden.
Soren Kvejborg war auch erstaunt, wie einfach sich die maßstabsgerechten Bilder von PointCab in Solidworks bearbeiten und nutzen lassen. Hinzu kam die Detailtreue der Ergebnisse. Besonders interessant ist es, dass Solidworks eine Art Bildbearbeitung beinhaltet. Damit kann der Benutzer die Anzeige der Vermessungsergebnisse an seine Bedürfnisse anpassen.
Nach diesem erfolgreichen Projekt ist die Technologie des Laserscanning fester Bestandteil des Leistungsangebotes von Kvejborg geworden. Für Kvejborg ermöglicht Laserscanning ein besseres Aufmaß und somit die bestmögliche Grundlage für die darauffolgenden Planungsleistungen. Soren Kvejborg blickt optimistisch in die Zukunft, da er in Dänemark zu den ersten Anwendern dieses interessanten Verfahrens gehört und es somit genug Arbeit geben wird.
Kvejborg, a Danish partner of Laserscanning Europe, applies laser scanning as a measurement method in food industry.
Kvejborg is a Danish engineering company for the construction of tools and robot applications. Kvejborg already uses short-range scanners by the company Creaform for the measurement of tools and small components. The director Soren Kvejborg is a firm believer in the future of laser scanning and sees the application of this technology as an inherent part of the company.
For the first time, Kvejborg and Laserscanning Europe cooperated in a wind power project in which high, accurate short-range scanners and large-volumed scanners were been combined purposefully.
Laserscanning Europe could satisfy Kvejborg that even large-volume scanning can be very interesting for measurements as a basis for planning for engineering services in robot application.
Just a few weeks after the first thought about it, the first application was found. Kvejborg works as a design office for a leading manufacturer of robot applications and special machine construction in the packaging industry in Scandinavia.
The Scandinavian manufacturer of special facilities often faces the problem of implementing new machines and robots in existing facilities. Frequently, the facilities had been constructed by other manufacturers and there are no current plans available. Thus, enormous planning risks hide in every project.
Soren Kvejborg proposed to a client the use of laser scanning in one of the next projects. The task of the first pilot project was to measure two robot workstations of a packing station in a wholesale bakery.
Laser scanning is attractive to the measurement of production facilities, the pipe routing and the equipment in food industry, since the production is often carried out in several shifts. The mere measurement of the single robot cells in the packaging plant takes only 10 minutes per cell. This was very important because the stacking of packaging on pallets had been performed in an extremely short period of time by production workers. Then, the remaining scans outdoors of the cell could be carried out easily.
Thereby, the facility could be completely measured and recorded in the running production.
For the measurement under such difficult conditions, Kvejborg brang in a professional operator by Laserscanning Europe as support in this project.
By the professional employment, the scanning of the whole manufacturing plant could be realised without any disturances of the production process. By laser scanning, Kvejborg could provide a perfect measurement – without production disruptions in the Danish wholesale bakery – in four hours for the plant manufacturer. Unitl now, the measurement of the plant by use of a tape measure and a disto meter by the plant manufacturer has required much more time. A full success for all involved parties.
The software PointCab was employed during the further handling. PointCab automatically generates layouts and sections out of laser scanning data. By the software, the first layouts could be provided the following day. The specialist planner of the plant manufacturer was very surprised about the rapid supply of the survey results.
A huge advantage of PointCab is that the results can be used in many CAD systems. Kvejborg as an engineering service provider applies Solidworks; the plant manufacturer works with Autodesk Inventor. The processing of laser scanning data in the formof point clouds would have been unimaginable since these systems don’t support point clouds. Due to PointCab, all involved parties can now use the same basis for planning.
Soren Kvejborg was also wondering about the simple handling of the scale images by PointCab in Solidworks. In addition, there is the attention to detail of the results. It is particularly interesting that Solidworks includes an image processing of sorts. Thus, the user can adapt the visualisation of the measurement results to his needs.
Due to this successful project, the laser scanning technology has become an inherent part of Kvejborg’s range of services. For Kvejborg, laser scanning enables a better measurement and, thus, the best possinle basis fot the following planning services. Soren Kvejborg has an optimistic view of the future since he is one of the first users of this interesting method in Denmark and will, consequently, get enough orders.
About Kvejborg
Kvejborg is a Danish company in the north of Jutland. The company operates as a design office for machine tools and robot applications. Kvejborg offers laser scanning from small components to entire production facilities. Kvejborg’s customers include tool-making firms, food industry as well as wind power industry. Kvejborg is among others a long-standing partner for the construction of tools of the worldwide known HiFi system manufacturer Bang & Olufsen.
www.kvejborg.dk